Double joint, EGZM, R, igubal®

Dimensional series: E following DIN ISO 12240
Housing material: igumid G
Material of spherical ball: iglidur® R
Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant
Double joint turned 90° available upon request

Er du usikker på, om delen passer?

Product description

igubal® spherical bearings

The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant

Typical application areas

Food industry
Railway technology
Automotive industry
Plant construction

You will find plenty of additional application areas at our Industry solutions

When to use it?

For high axial and radial loads
When easy installation is required
In case of cramped installation space
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80 °C
If diameters above 12 mm are required
If rotation speeds higher than 0.5 m/s are required

Use our filter options to find the suitable product

Tolerances
Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Check the inner diameter

Assembly
igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Tekniske data

Online-værktøjer

Produktfinder for sfæriske lejer

Hurtig til de rette sfæriske lejer. iglidur®-produktfinderen viser dig den rette sfæriske lejeløsning til din anvendelse med blot et par klik.

Ekspert i sfæriske lejer

Ved at indtaste nogle få data kan du beregne den formodede driftslevetid af igubal® sfæriske lejer.

Downloads

Andre løsninger

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

fra 4,98 EUR/Stk.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

fra 2,22 EUR/Stk.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

fra 5,12 EUR/Stk.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® R

Simple assembly, two mounting holes, dimensional series E

fra 3,66 EUR/Stk.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® R

For higher radial loads, four mounting holes, dimensional series E

fra 4,23 EUR/Stk.

Clip bearing, maximum compensation of tolerances, EGFM-T R, igubal®

Tolerance compensation, dimensional series E

fra 4,32 EUR/Stk.

Pillow block bearing, ESTM, R, igubal®

Simple assembly, two mounting holes, dimensional series E

fra 2,82 EUR/Stk.

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

fra 17,89 EUR/Stk.

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

fra 1,96 EUR/Stk.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

fra 12,19 EUR/Stk.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

fra 1,40 EUR/Stk.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

fra 1,60 EUR/Stk.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

fra 22,25 EUR/Stk.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

fra 1,95 EUR/Stk.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

fra 1,43 EUR/Stk.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

fra 3,55 EUR/Stk.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

fra 4,22 EUR/Stk.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

fra 2,25 EUR/Stk.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

fra 1,55 EUR/Stk.

Adapter screw, PKRM, igubal®

Right-hand thread

fra 5,64 EUR/Stk.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

fra 2,39 EUR/Stk.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

fra 2,48 EUR/Stk.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

fra 6,29 EUR/Stk.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

fra 3,87 EUR/Stk.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

fra 3,20 EUR/Stk.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

fra 6,07 EUR/Stk.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

På forespørgsel

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

fra 23,63 EUR/Stk.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

fra 8,58 EUR/Stk.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

fra 9,42 EUR/Stk.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

fra 3,97 EUR/Stk.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

fra 2,73 EUR/Stk.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

fra 5,41 EUR/Stk.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

fra 2,71 EUR/Stk.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

fra 4,81 EUR/Stk.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

fra 9,26 EUR/Stk.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

På forespørgsel

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

fra 4,22 EUR/Stk.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

fra 6,60 EUR/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

fra 11,03 EUR/Stk.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

fra 16,17 EUR/Stk.

Clevis joint, GERI, igubal®

Right-hand thread

fra 2,12 EUR/Stk.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

fra 2,32 EUR/Stk.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

fra 2,39 EUR/Stk.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

fra 73,58 EUR/Stk.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

fra 3,00 EUR/Stk.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

fra 0,51 EUR/Stk.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

fra 3,91 EUR/Stk.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

fra 32,60 EUR/m

Land/Region

Ved at vælge dit land vil du få vist lokale tilbud og information.

Vælg venligst leveringssted