Every single iglidur® material has its own special properties, which determine its suitability for specific applications and requirements. The iglidur® W300 material gives excellent wear resistance, even in abrasive environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these external conditions.
For especially long service life
Low coefficient of friction
Extremely high wear resistance
Also suitable for soft shafts
Typical application areas
You will find plenty of additional application areas at our [Link id="9"]
When to use it?
If you need maintenance-free materials
When dimensional series K components are to be fitted
If high compressive strength is required
If high flexibility is required
When not to use it?
If temperatures are higher than +90 °C
If diameters above 30 mm are required
If rotation speeds higher than 0.5 m/s are required
Maintenance-free igubal® spherical balls are designed with a tolerance of the inner diameter of E10. The shaft tolerance should be between h6 and h9. Unless stated otherwise, all tolerance values are treated according to DIN ISO 2768-m