Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

3D print filaments for maximum service life

Up to 50 times more abrasion resistant than standard filaments
iglidur® 3D print filaments are special filaments for special requirements. They have lower coefficients of friction than conventional 3D printing materials and are suitable for special tasks depending on the material. The offer ranges from 3D printing materials for simple processing with very good coefficients of wear, and filament with very good friction properties, with high strength, up to chemically resistant materials and those that are suitable for additive production processes according to the "fused deposition modelling" (FDM/FFF). You can install printed parts such as plain bearings or worm gears and put them to industrial use – in the prototype phase or in serial production.
 
iglidur® filaments can be processed on all commercial printers. All methods that ensure that ABS materials adhere to the print bed also apply for igus® special filaments.

Produkter

Filtrer

Ledningskrav
Requirements
Material

Antal produkter: 7

iglidur® I180-PF, filament for 3D printing
  • Versatile use: good combination of high wear resistance, strength and temperature resistance
  • Good processing ability with an enclosed printer and igus® adhesive film
  • Also available in black (iglidur® I180-BL)
  • Flexural strength: 46 / 33 MPa

fra 59,00 USD / Stk.

Til produktsiden
iglidur® I180-PF-BL, 3D printer filament
  • Versatile use: good combination of high wear resistance, strength and temperature resistance
  • Good processing ability with an enclosed printer and igus adhesive film
  • Colour black
  • Flexural strength: 46 / 33 MPa

På forespørgsel

Til produktsiden
iglidur® I170-PF, filament for 3D printing
  • Improved abrasion-resistance
  • High-quality processing: suitable for experts
  • Flexural strength: 33 / 17 MPa

fra 61,00 USD / Stk.

Til produktsiden
iglidur® J260-PF, filament for 3D printing
  • Maximum service life of the Tribo-Filament
  • Very good coefficient of friction for low or medium loads
  • Higher temperature resistance up to 120°C
  • High-quality processing: suitable for experts
  • Flexural strength: 41 / 13 MPa

fra 64,00 USD / Stk.

Til produktsiden
iglidur® I150-PF, filament for 3D printing
  • Food compliant
  • tribo-filament that is easiest to process 
  • High abrasion resistance at low surface speeds 
  • Good mechanical coefficients 
  • Cost-effective
  • Compliant with EU Regulation 10/2011
  • Flexural strength: 54 MPa

På forespørgsel

Til produktsiden
iglidur® C210-PF, filament for 3D printing
  • High chemical resistance
  • High abrasion resistance
  • High-quality processing: suitable for experts
  • Flexural strength: 38 MPa

På forespørgsel

Til produktsiden
iglidur® J350-PF, filament for 3D printing
  • high wear resistance
  • fulfils the demands regarding fire protection of the US Federal Aviation Administration (FAA)
  • lubrication and maintenance free
  • higher temperature resistance up to 180 °C (permanently)
  • High-quality processing: suitable for experts

 
 
  • Flexural strength: 55 MPa

På forespørgsel

Fås på forespørgsel
Til produktsiden

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h