Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

Bar stock - iglidur®

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Produkter

Filtrer

Ledningskrav
Requirements
Material

Antal produkter: 27

iglidur® A160, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • self lubricating and maintenance-free

fra 36,00 USD / m

Til produktsiden
iglidur® A180, round bar
  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance

fra 9,91 USD / m

Til produktsiden
iglidur® A181, round bar
  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance

fra 20,08 USD / m

Til produktsiden
iglidur® A350, round bar
  • For use with temperatures up to +180 °C
  • Comply with the requirements of the FDA
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Lubrication- and maintenance-free

fra 38,02 USD / m

Fås på forespørgsel
Til produktsiden
iglidur® F2, round bar
  • Used to prevent electrostatic charges
  • Also suitable for wet applications
  • Lubrication and maintenance-free

fra 137,88 USD / m

Til produktsiden
iglidur® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free

fra 196,62 USD / m

Til produktsiden
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

fra 10,30 USD / m

Til produktsiden
iglidur® J2, round bar
  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Lubrication and maintenance-free

fra 146,97 USD / m

Til produktsiden
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

fra 18,69 USD / m

Til produktsiden
iglidur® J4, round bar
  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption

fra 22,00 USD / m

Til produktsiden
iglidur® J200, round bar
  • Very long service life with hard anodized aluminum
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Self-lubricating and maintenance-free

På forespørgsel

Til produktsiden
iglidur® J260, round bar
  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Lubrication and maintenance-free

fra 83,07 USD / m

Til produktsiden
iglidur® J350, round bar
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements

fra 75,36 USD / m

Til produktsiden
iglidur® M250, round bar
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance

fra 28,82 USD / m

Til produktsiden
iglidur® P210, round bar
  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio

fra 80,23 USD / m

Til produktsiden

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h