myigus
Indkøbskurv
(0)
Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273
Send meddelelse
Se alle kontakter
DK(DA)
Menu
  1. Hjem
  2. Samleledslejer

Angled / in-line ball and socket joints

igubal® thrust bearings are corrosion-resistant, resistant to chemicals, dust and dirt, UV radiation and nuclear radiation. In addition, they are temperature resistant between -30 and +80 °C. The thrust bearings with a space-saving design consist of two components: an impact resistant and rigid ball pan and spherical washer that glides loosely in the pan, held by the shaft lying on it. The bearings are available in sizes from 5 to 20 mm. Upon request, igus® will manufacture special components with different dimensions.
mere
mindre
Ekspert i sfæriske lejer
Ekspert i sfæriske lejer

Ved at indtaste nogle få data kan du beregne den formodede driftslevetid af igubal® sfæriske lejer.

Produkter

List
Tile

Antal produkter: 14

Angled ball and socket joint. WGRM, igubal®
Angled ball and socket joint. WGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGLM, igubal®
Angled ball and socket joint, WGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGRM, with steel pins, igubal®
Angled ball and socket joint, WGRM, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGRM LC, low cost, igubal®
Angled ball and socket joint, WGRM LC, low cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Very lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden
In-line ball and socket joint, AGRM, igubal®
In-line ball and socket joint, AGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening

På forespørgsel

Til produktsiden
In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening

På forespørgsel

Til produktsiden
In-line ball and socket joint, AGRM, with steel pin, igubal®
In-line ball and socket joint, AGRM, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening

På forespørgsel

Til produktsiden
in-line ball and socket joint, AGRM LC, low-cost, igubal®
in-line ball and socket joint, AGRM LC, low-cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals

På forespørgsel

Til produktsiden
In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals

På forespørgsel

Til produktsiden
In-line ball and socket joint, AGRM LC, with steel pin, igubal®
In-line ball and socket joint, AGRM LC, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals

På forespørgsel

Til produktsiden
Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Very lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust

På forespørgsel

Til produktsiden

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

+45 40317811
Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h