Vælg venligst leveringssted

Valget af land/region kan påvirke diverse faktorer som pris, forsendelsesmuligheder og produkttilgængelighed.
Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

Spherical balls

Bearings with igubal® spherical balls are 80% lighter than their metal counterparts. But comparably robust, nevertheless. At the same time, they are up to 40% more cost-effective and more economic in operation, in addition. They permit dry running without lubrication, which makes them maintenance-free.  igubal® spherical balls are available in various high-performance plastics, each with different properties. The iglidur® X polymer stands up to extreme temperatures between -100 °C and +250 °C and maintains its full compressive strength. iglidur® X almost universally chemical-resistant. iglidur® J scores with a low level of moisture absorption, iglidur® R with its especially low purchase cost. Another high-performance plastic was developed for the food industry that can be detected by metal detectors, thus increasing product safety. And iglidur® UW is suitable for underwater applications. The igubal® spherical balls are available in dimensional series E and K. The tolerance of the inner diameter corresponds to E10 (the shaft should have a tolerance between h6 and h9).  

Kategorier
Filtrer
Size
Temperatures
Requirements
Material

Grundet den globale forsyningssituation samt en aktuel stor ordretilgang, er vore leveringstider pt vejledende, og kan således ændres med kort varsel. Ved produktions- eller maskinstop er i velkomne til, at kontakte os for hurtigere levering:

Antal produkter: 21

Nyt

Spherical insert bearing, moulded, A350EM-SP, mm, igubal®

  • Dimensional series E following DIN ISO 12240 
  • Spherical ball material: iglidur® A350
  • Suitable for food contact
  • Cost-effective production through injection moulding
  • For metallic bearing housings
  • Material spherical ball: iglidur® A350
På forespørgsel
Til produktsiden

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

  • Dimensional series E following DIN ISO 12240 
  • Spherical ball material: iglidur® J
  • Low moisture absorption
  • Cost-effective production through injection moulding
  • For metallic bearing housings
  • Material spherical ball: iglidur® J
fra 3,69 EUR/Stk.
13 produkter, hvoraf klar til afsendelse:
9 24 - 48 timer
4 3 - 4 arbejdsdage
Til produktsiden

Spherical balls, JEM, interchangeable spherical ball, slim, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® J 
  • For various metal bearing housings
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good chemical resistance
  • Best material to use with soft shaft materials
  • Low moisture absorption
  • Material spherical ball: iglidur® J
fra 16,91 EUR/Stk.
8 produkter, hvoraf klar til afsendelse:
8 2 uger
Til produktsiden

Spherical ball, A350EM, interchangeable spherical ball, slim, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® A350
  • For various metal bearing housings
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • For use with temperatures up to +180 °C
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Material spherical ball: iglidur® A350
fra 21,03 EUR/Stk.
8 produkter, hvoraf klar til afsendelse:
3 24 - 48 timer
3 2 uger
Til produktsiden

Spherical ball, A180EM, interchangeable spherical ball, slim, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® A180
  • For various metal bearing housings
  • Complies with FDA regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • Good wear-resistance
  • Material spherical ball: iglidur® A180
fra 16,12 EUR/Stk.
8 produkter, hvoraf klar til afsendelse:
2 24 - 48 timer
6 2 uger
Til produktsiden

Spherical ball, high-temperature, XKM, mm, igubal®

  • Dimensional series: K, following DIN ISO 12240 
  • For temperatures up to +250°C
  • Material spherical ball: iglidur® X
fra 2,58 EUR/Stk.
2 produkter, hvoraf klar til afsendelse:
1 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

  • Dimensional series: K following DIN ISO 12240
  • Material of spherical ball: iglidur® J
  • splittable
  • Low moisture absorption
  • Material spherical ball: iglidur® J
fra 11,52 EUR/Stk.
2 produkter, hvoraf klar til afsendelse:
2 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, clearance-free, J4VEM, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® J4V 
  • Pre-loaded clearance-free
  • Clearance-free in unloaded condition
  • Material spherical ball: iglidur® J4V
fra 1,51 EUR/Stk.
5 produkter, hvoraf klar til afsendelse:
5 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, cost-effective, RKM, mm, igubal®

  • Dimensional series: K following DIN ISO 12240
  • Material of spherical ball: iglidur® R
  • Cost-effective, good wear resistance
  • Material spherical ball: iglidur® R
fra 1,85 EUR/Stk.
2 produkter, hvoraf klar til afsendelse:
1 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, low level of moisture absorption, JKM, mm, igubal®

  • Dimensional series: K following DIN ISO 12240
  • Material of spherical ball: iglidur® J
  • Low moisture absorption
  • Material spherical ball: iglidur® J
fra 1,61 EUR/Stk.
14 produkter, hvoraf klar til afsendelse:
14 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, low cost, low level of moisture absorption, J4EM, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® J4
  • Cost-effective
  • Low moisture absorption
  • Material spherical ball: iglidur® J4
fra 0,90 EUR/Stk.
12 produkter, hvoraf klar til afsendelse:
12 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, detectable, RN248EM, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® RN248
  • Detectable
  • Material spherical ball: iglidur® RN248
fra 4,60 EUR/Stk.
4 produkter, hvoraf klar til afsendelse:
4 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, JEM, interchangeable spherical ball, split, mm, igubal®

  • Dimensional series E following DIN ISO 12240 
  • Material of spherical ball: iglidur® J 
  • For various metal bearing housings
  • Low wear against different shaft materials
  • Low coefficient of friction during dry operation
  • Vibration-dampening
  • Good chemical resistance
  • Best material to use with low-cost soft shaft materials
  • Low moisture absorption
  • Material spherical ball: iglidur® J
fra 2,38 EUR/Stk.
4 produkter, hvoraf klar til afsendelse:
4 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, standard, WKM, mm, igubal®

  • Dimensional series: K following DIN ISO 12240
  • Material of spherical ball: iglidur® W300
  • Standard, with low coefficients of friction
  • Material spherical ball: iglidur® W300
fra 1,81 EUR/Stk.
14 produkter, hvoraf klar til afsendelse:
14 3 - 4 arbejdsdage
Til produktsiden

Spherical ball, cost-effective, REM, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® R
  • Cost-effective, good wear resistance
  • Material spherical ball: iglidur® R
fra 1,51 EUR/Stk.
6 produkter, hvoraf klar til afsendelse:
5 3 - 4 arbejdsdage
Til produktsiden

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.