Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Produkter

Filtrer

Size
Electrical information
Fitting
System
Design

Antal produkter: 35

drylin® E stepper motor with connector, encoder and brake, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.5 Nm
  • Nominal current: 1.8 A
  • Motor connection: Metric connector

fra 624,26 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E stepper motor with stranded wire, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: strands and encoder, JST connector

På forespørgsel

Til produktsiden
drylin® E stepper motor with stranded wire and encoder, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: metric connector

På forespørgsel

Til produktsiden
drylin® E lead screw stepper motor with strands, NEMA 23, short type
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP40 
  • Holding torque: 1.00Nm
  • Nominal current: 2.8 A
  • Motor connection: strand with JST connector

På forespørgsel

 
Leveringstid efter forespørgsel
Til produktsiden
drylin® E stepper motor with connector, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

fra 140,10 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E special stepper motor with terminal box and encoder, water protection, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP68 (10 m)
  • Holding torque: 1.30 Nm
  • Nominal current: 4.20 A
  • Motor connection: terminal box

fra 872,81 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E stepper motor with connector, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

fra 218,91 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E stepper motor with connector, encoder and brake, NEMA 34
  • Installation size: NEMA34/flange installation size 86 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 5.90 Nm
  • Nominal current: 6.40 A
  • Motor connection: Metric connector

fra 711,31 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E lead screw stepper motor with strands and encoder, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: strands and encoder, JST connector

fra 173,03 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E lead screw stepper motor with strands, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Moto connection: Strand with JST connector

fra 79,14 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E stepper motor with connector, encoder and brake, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

fra 572,91 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E special stepper motor with connector and splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70Nm
  • Nominal current: 3.00A
  • Motor connection: Metric connector

fra 237,09 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E special stepping motor with connector, encoder and splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70 Nm
  • Nominal current: 3.00 A
  • Motor connection: Metric connector

fra 360,38 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E special stepper motor with strands, vacuum, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP00 (vacuum)
  • Holding torque: 0.70Nm
  • Nominal current: 2.50A
  • Motor connection: Stranded wire

fra 938,60 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden
drylin® E lead screw stepper motor with strands and encoder, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP40
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: strands and encoder, JST connector

fra 251,14 USD/Stk.

1 produkter, hvoraf klar til afsendelse:
1 om 24 - 48 timer
Til produktsiden