drylin® E-drevteknologi | igus®
I onlinebutikken for drevteknologi finder du alt, hvad du skal bruge til din automatisering. Vi tilbyder et bredt udvalg af basisversioner af vores lineære akser med spindeldrev, tandremsdrev eller tandstangsdrev. Disse kan suppleres med elektriske eller manuelle drev via håndhjul eller elmotorer. Alle igus' drevteknologiprodukter er smørefri, hvilket reducerer vedligeholdelsesomkostningerne. igus har også de rigtige drivteknologiprodukter i sit butikssortiment til særlige udfordringer. Uanset om det drejer sig om ekstreme temperaturer, brug under vand eller kontakt med fødevarer, så finder du, hvad du søger her. Mange af vores produkter er tilgængelige fra lager og klar til afsendelse inden for 24 timer. Køb de rigtige produkter nu for at komme i gang med automatisering.
drylin® D7- (X) stepper motor output stage
- Suitable for 28 - 42mm motor flange size (NEMA11-17)
- Up to 3A peak current
- 5-24V control & 24-48V load voltage
- Operation mode 1: clock/direction
- Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
- Quiet operation & automatic tuning
Nyt
drylin® E stepper motor, connection cable, NEMA 17
- Installation size: NEMA17/flange dimension 42mm
- Protection class: IP65
- Holding torque: 0.50Nm
- Rated current: 1.80A
- Motor connection: connection cable 1m
Nyt
drylin® E stepper motor, connection cable, NEMA 23
- Installation size: NEMA23/Flange dimension 56mm
- Protection class: IP65
- Holding torque: 2.00Nm
- Nominal current: 4.20A
- Motor connection: connection cable 1m
Nyt
drylin® E stepper motor, connection cable, NEMA 24
- Installation size: NEMA24/flange dimension 60mm
- Protection class: IP65
- Holding torque: 3.50Nm
- Nominal current: 4.20A
- Motor connection: connection cable 1m
Nyt
drylin® E stepper motor, connection cable, NEMA34
- Installation size: NEMA 34/flange dimension 86mm
- Protection class: IP65
- Holding torque: 5.90Nm
- Nominal current: 6.40A
- Motor connection: connection cable 1m
drylin® D8- (X) stepper motor output stage
Product information
- Without connecting cable
- Set consists of 3x drylin® D8
- Can control stepper motors with a continuous current of up to 4A with a supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
drylin® D2 motor control system for stepper, DC and EC/BLDC motors
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
drylin® D9- (X) stepper motor output stage
- Suitable for 86mm motor flange size (NEMA34)
- Up to 9.8A peak current
- 5-24V control & 24-48V load voltage
- Operation mode 1: clock/direction
- Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
- Quiet operation & automatic tuning
drylin® D3 for direct current motors
- Simple automation directly using the control system without software and/or PC
- Operation with limit switch or via power consumption
- Left/right operation and speed control directly on the housing
- Option for external switches/joysticks
- Various modes of operation, such as tip operation and start to finish (semi-automatic)
- Various adjustable acceleration ramps
- Power supply via 24V/2.5A
All relevant documents for dryve D3 can be found in the downloads.
drylin® D3-LM motor control system for DC motors with loop mode
- Same dimensions as the standard D3
- Extended functions for "Micro Automation"
- Individually preprogrammed pendulum movements
- Individually preprogrammed pause times between movements
drylin ZLX high performance linear module with toothed belt
- Toothed belt axis of the new generation
- Particularly easy system integration
- Robust high profile
- max. stroke length: 3500 mm
- Request further product versions or information
drylin ZLW-0630-B toothed belt double axis with stepper motor
- Double axis consisting of two toothed belt axles and double shaft motor
- Axle type: ZLW-0630-02-B-60
- Motor: MOT-AN-S-060-005-042-L-A-AAAB
- Motor size: NEMA 17
- Load: 2 kg*
fra 580,25 EUR/Stk.
Til produktsiden
Nyt
drylin DLE-DA-ZLX toothed belt double axis with stepper motor
- Double axis based on two ZLX toothed belt axes
- For large work spaces up to 500 x 500 mm
- Easy installation and addition of accessories thanks to numerous grooves
- Ready-to-connect system consisting of two ZLX linear axes, motor and gearbox kit and connecting shaft
På forespørgsel
Til produktsiden
drylin® E DC motor with planetary gearbox and protective housing
- Installation size: flange dimension 36/42mm
- Protection class: IP41
- Torque: 0.1Nm to 1.5N
- Operating voltage: 12VDC & 24VDC
- Speed: up to 440rpm
- Direct battery operation possible
- Motor connection: Metric M12 connector
drylin ZLW-0630-S toothed belt double axis with stepper motor
- Double axis consisting of two toothed belt axles and double shaft motor
- Axle type: ZLW-0630-02-S-100
- Motor: MOT-AN-S-060-020-056-L-A-AAAB
- Motor size: NEMA 23
- Load: 5 kg*
fra 1.029,10 EUR/Stk.
Til produktsiden