igusigus-icon-cart(0)

iglidur® X, two hole flange bearing, mm

The chemical and temperature specialist, up to 150 MPa static
iglidur® X, two hole flange bearing, mm
igus-icon-lupe
iglidur® X, two hole flange bearing, mm drawing
igus-icon-lupe
1 from 2
iglidur® X, two hole flange bearing, mm
iglidur® X, two hole flange bearing, mm drawing
  • Part number: XFL-14
  • Material: iglidur® X
  • Shape: Shop two hole flange bearings
  • Dimensions:
    • d1 14 mm
  • Adjust dimension
  • Manufacturing method: Injection moulding
  • Service life:

    Not available

    igus-icon-info-circle-gray
Material properties:
  • Temperature resistant from -100 °C to +250 °C in continuous operation
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Universal chemical resistance
  • High compressive strength
Total price:

plus VAT and shipping charges

loading...
igus-icon-lieferzeit-dot
klar til afsendelse om 24 - 48 timer
iglidur® - maintenance-free two hole flange bearing
 
With this design, it is possible to use iglidur® high-performance plain bearings in locations where recommended housing bore tolerances are not possible. Due to the design of the bearing, high loads are possible although minimum requirements are put on the precision of the housing.
 
iglidur® X is defined by its combination of very high temperature resistance with high compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
  • Very good wear resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Lightweight
  • Lubrication-free
 
When to use it?
  • When a screwed-on flange bearing is needed
  • When using a clip bearing solution as a plate feed-through is not sufficient
  • When extremely high absorption tolerances are present
  • When the press fit of a press-in bearing is not sufficient to secure the bearing axially
When not to use it?
  • When an additional angular alignment is required
  • When a screw connection is not possible
  • When a large guide length is required
Use our filter options to find the suitable product

Assembly
 
Various securing methods are considered depending on the loads. For low radial loads, it is sufficient to mount iglidur® flange bearings on one surface simply with two bolts. For higher radial loads, it is advisable to support the iglidur® flange bearing in a hole on the reinforced side in the direction of the load. For this hole, large tolerances are permitted, since it serves only as additional support for the iglidur® flange bearing. In order to achieve higher radial loads in the bearings, the iglidur® flange bearing can be press-fitted into a recommended housing bore with H tolerances. The additional bolts ensure the fit of the bearing in the housing. No special tools or equipment are required to install iglidur® maintenance-free flange bearings. Even aligning bearings on shafts with multiple bearings is easy during installation.
Unsure if it fits?

Consulting

I would be happy to answer your questions personally

Internt Salg
Internt Salg

igus-icon-phone+45 86 60 33 73

Shipping and consultation

In person:
Monday to Friday from 8am - 8pm.
Online:
Chat service
24h
Hvad kan vi gøre bedre for dig? Giv os din feedback.

Om igus®

Services

Kontakt

Vores betalingsmetoder

  • Køb på konto

    Følg os

    • LinkedIn

    Bliv opdateret og tilmeld dig igus® Nyhedsbrev her.

    igus-icon-globeSprog:Dansk|Land:Danmark

    Termerne "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "tribotape", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" og "yes" er juridisk beskyttede varemærker tilhørende igus® GmbH/Köln i Tyskland og visse andre lande hvor gældende. Dette er en ikke-udtømmende liste over varemærker (f.eks. afventende varemærkeansøgninger eller registrerede varemærker) tilhørende igus GmbH eller tilknyttede selskaber for igus i Tyskland, Den Europæiske Union, USA og/eller andre lande eller jurisdiktioner.

    igus® understreger at vi ikke forhandler nogen produkter fra firmaerne Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber og alle andre producenter af drev der er nævnt på dette website. De af igus® tilbudte produkter er produceret af igus® GmbH