Rod end bearing with male thread, KALM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Rod end in classic design with standard spherical ball iglidur® W300
Stainless steel sleeve for higher tightening torque
Left-hand thread
igumid G housing
Dimensional K series according to DIN ISO 12240

Er du usikker på, om delen passer?

Expert system

Download CAD files

Free sample request

Ask the expert

igubal contact request

igubal® sample box

Order free of charge

Product description

igubal® rod end bearing with male thread

igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted.

Housing made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -40 °C to +90 °C in long-term use

In standard spherical bearings, the spherical ball is made from iglidur® W300 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements. Version with stainless steel sleeve in the spherical ball for higher tightening torque.

Maintenance-free dry operation
Extremely cost-effective
No lubrication
High rigidity
Very high durability in varying loads
Compensation of misalignment errors
Compensation of edge loads
Resistant to dirt, dust and lint
Resistant to corrosion and chemicals
Can be used in liquid media
High vibration-dampening
Suitable for rotating, oscillating and linear movements
Inner rings set in housings with very low clearance
Very lightweight

Typical application areas

Bicycle manufacturing
Plant construction
Packaging
Offshore

You will find plenty of additional application areas at our Industry solutions

When to use it?

If you want to save weight
For rotating, oscillating and linear movements
If high-frequency oscillations/vibrations occur
If low-noise operation is required
If you need an electrically insulating part
If corrosion resistance is required
In combination with pneumatic cylinders and gas struts
If chemical resistance is required
If high rigidity is required

When not to use it?

If temperatures are higher than +90 °C
If rotation speeds higher than 0.5 m/s are required
If very high tensile and axial forces occur
When applications with hydraulic cylinders are planned
If diameters above 30 mm are required

Use our filter options to find the suitable product

Tolerances
The igubal® bearing elements can be used with different tolerances according to each application. They are designed with a large bearing clearance in the standard product, which enables secure operation even under high peripheral speeds. The bore of the inner ring is produced to a standard tolerance range E10. Shafts should also meet recommended tolerances h6 and h9. Check the inner diameter

Coefficients of sliding friction and speed

One important advantage of maintenance-free igubal® spherical bearings is that rapid, rotary movements of a mounted shaft take place directly in the spherical portion, made from iglidur® materials. The benefit of this plastic/steel plain bearing arrangement is that high speeds are possible even in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. In contrast, angular movements of the spherical bearings take place at the spherical outer diameter of the spherical ball. The maintenance-free igubal® bearing elements also permit linear movements of the shaft.

Chemical resistance of igubal® bearings

Both the spherical ball made of iglidur® W300 and the housing made of igumid G are resistant to weak alkalines, weak acids and fuels, as well as all types of lubricants. The moisture absorption of igubal® spherical bearings is approximately 1.3% of its regular weight in standard environments. The saturation limit submerged in water is 6.5%. This must be taken into consideration in light of the prevailing environmental conditions. If a lower moisture absorption is required, it is worthwhile having a look at the various materials available.

UV resistance

The corrosion resistance of igubal® bearings is of special value for outdoor applications. igubal® bearings are permanently resistant to UV radiation. A small change in colour (dark coloration) of the spherical ball due to UV radiation and other weathering does not affect the mechanical, electrical or thermal properties.

Tekniske data

Tilbehør

Online-værktøjer

Ekspert i sfæriske lejer

Ved at indtaste nogle få data kan du beregne den formodede driftslevetid af igubal® sfæriske lejer.

Downloads

Andre løsninger

Rod end bearing with male thread, KARM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, right-hand thread, dimensional series K, housing A, metal housing

fra 4,63 EUR/Stk.

Rod end with female thread, KBRM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, right-hand thread, dimensional series K, housing B

fra 4,18 EUR/Stk.

Rod end with female thread, KBLM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, left-hand thread, dimensional series K, housing B

fra 4,19 EUR/Stk.

Rod end with female thread, KCRM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Right-hand thread, dimensional series K, housing C

fra 4,85 EUR/Stk.

Rod end with female thread, KCLM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Left-hand thread, dimensional series K, housing C

fra 4,85 EUR/Stk.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

fra 1,95 EUR/Stk.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

fra 31,72 EUR/m

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

fra 17,89 EUR/Stk.

Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series K, housing B

På forespørgsel

Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series K, housing B

På forespørgsel

Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series E, housing B

På forespørgsel

Rod end bearing with female thread, detectable EBLM, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series E, housing B

På forespørgsel

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

fra 1,96 EUR/Stk.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

fra 12,19 EUR/Stk.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

fra 1,40 EUR/Stk.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

fra 1,60 EUR/Stk.

Spherical insert bearing, A180EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

fra 17,06 EUR/Stk.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

fra 22,25 EUR/Stk.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

fra 1,95 EUR/Stk.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

fra 1,43 EUR/Stk.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

fra 3,55 EUR/Stk.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

fra 4,22 EUR/Stk.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

fra 2,25 EUR/Stk.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

fra 1,55 EUR/Stk.

Adapter screw, PKRM, igubal®

Right-hand thread

fra 5,64 EUR/Stk.

Clevis joint, detectable, GERM-DT, igubal®

Detectable, right-hand thread

fra 5,30 EUR/Stk.

Spring-loaded fixing clip, detectable, GEFM-DT, igubal®

Detectable

fra 0,96 EUR/Stk.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

fra 2,39 EUR/Stk.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

fra 2,48 EUR/Stk.

Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®

Detectable, right-hand thread

fra 6,12 EUR/Stk.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

fra 6,29 EUR/Stk.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

fra 3,87 EUR/Stk.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

fra 3,20 EUR/Stk.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

fra 6,07 EUR/Stk.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

På forespørgsel

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

fra 23,63 EUR/Stk.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

fra 8,58 EUR/Stk.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

fra 9,42 EUR/Stk.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

fra 3,97 EUR/Stk.

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

fra 4,98 EUR/Stk.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

fra 2,22 EUR/Stk.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

fra 2,73 EUR/Stk.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

fra 5,12 EUR/Stk.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

fra 5,41 EUR/Stk.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

fra 2,71 EUR/Stk.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

fra 4,81 EUR/Stk.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

fra 9,26 EUR/Stk.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

På forespørgsel

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

fra 4,22 EUR/Stk.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

fra 6,60 EUR/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

fra 11,03 EUR/Stk.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

fra 16,17 EUR/Stk.

Clevis joint, GERI, igubal®

Right-hand thread

fra 2,12 EUR/Stk.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

fra 2,32 EUR/Stk.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

fra 2,39 EUR/Stk.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

fra 73,58 EUR/Stk.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

fra 3,00 EUR/Stk.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

fra 0,51 EUR/Stk.

Vælg venligst leveringssted