Vælg venligst leveringssted

Valget af land/region kan påvirke diverse faktorer som pris, forsendelsesmuligheder og produkttilgængelighed.
Se alle lokationer
Gå til www.igus.com
myigus
Indkøbskurv
(0)
Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273
Send meddelelse
Se alle kontakter
DK(DA)
Menu
  1. Hjem
  2. Drive technology
  3. Elektriske motorer
  4. Stepmotorer
  5. drylin® E stepper motor with connector, encoder and brake, NEMA 23

drylin® E stepper motor with connector, encoder and brake, NEMA 23

  • Installation size: NEMA23/flange dimension 56mm
  • Protection class: Motor housing IP65 (shaft seal IP52)
  • Holding torque: 2.00Nm
  • Rated current: 4.20A
  • Motor connections: Metric M8/M12 connectors
  • Brake voltage: 24V
  • Integrated brake for vertical loads

Er du usikker på, om delen passer?

Download CAD files
Ekspertsystem motor

Ekspertsystem motor
Product description
NEMA23: The best known stepper motor size
 
Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
 
The brake can hold the payload in position when the motor is not under power. This is used as a safety feature during power failures – strongly recommended for vertically mounted systems.
Tekniske data
Downloads

Andre løsninger

Jaw coupling with square axis clamp
Jaw coupling with square axis clamp

Vibration dampening and easy fitting

fra 41,36 EUR/Stk.
Jaw coupling with round axis clamp
Jaw coupling with round axis clamp

Vibration dampening and easy fitting

fra 34,25 EUR/Stk.
drylin® D1 motor control system for stepper, DC and EC/BLDC motors
drylin® D1 motor control system for stepper, DC and EC/BLDC motors

Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V

fra 378,84 EUR/Stk.
chainflex® CF240 data cable
chainflex® CF240 data cable

For medium duty applications, PVC outer jacket, shielded, oil-resistant and flame-retardant

fra 1,94 EUR/m
Motor flange for stepper and DC motors (motor bell)
Motor flange for stepper and DC motors (motor bell)

Matches the drylin® E coupling

fra 32,76 EUR/Stk.
chainflex® Connection cable straight M12 x 1, CF.INI CF9
chainflex® Connection cable straight M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

fra 14,70 EUR/Stk.
chainflex® Connection cable angled M12 x 1, CF.INI CF9
chainflex® Connection cable angled M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

fra 14,78 EUR/Stk.
chainflex® Connection cable straight M8 x 1, CF.INI CF9
chainflex® Connection cable straight M8 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

fra 12,21 EUR/Stk.
External braking resistors (power class 50/75/100 W) for EC/BLDC motors
External braking resistors (power class 50/75/100 W) for EC/BLDC motors

NEMA17-34

fra 4,81 EUR/Stk.

Konsultation

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

+45 40317811
Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.