Vælg venligst leveringssted

Valget af land/region kan påvirke diverse faktorer som pris, forsendelsesmuligheder og produkttilgængelighed.
Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

Grundet den globale forsyningssituation samt en aktuel stor ordretilgang, er vore leveringstider pt vejledende, og kan således ændres med kort varsel. Ved produktions- eller maskinstop er i velkomne til, at kontakte os for hurtigere levering:

iglidur® A350, sleeve bearing with flange, mm

  • Very good coefficient of friction
  • Low humidity absorption
  • Good wear resistance under water
  • High media resistance
  • Resistant to high loads (>60 N/mm²)
  • FDA-compliant
  • EU 10/2011-compliant
Product description
iglidur® A350 | The endurance runner at higher temperatures in the food sector
iglidur® A350 knife edge rollers are made for practically all loads in food and packaging machinery. Even high loads are no problem and the rollers work reliably without additional lubrication.
 
Typical application areas
 
Food industry
Beverage industry
Medical technology
 
You can find further applications here:
Industry solutions
 
 
When to use it?
  • When lubrication-free deflection of conveyor belts is required
  • When FDA-compliance is required
  • When precise guiding is required
  • If wear-resistance and FDA conformance are necessary at high loads
  • If the bearing is used in an acid environment
  • When a cost-effective and easy-to-install solution is required
When not to use it?
  • When high belt speeds are
    necessary
  • When temperatures are continuously higher than +180 °C
  • When high forces are applied on the belts
  • When a static knife edge
    is required
Use our filter options to find the suitable product 
 
Tolerances and measurement system
The installation dimensions and tolerances of the iglidur® knife edge rollers are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors.  
Testing methods
 
 
Certifikater og standarder
RoHS compliant
According to 2011/65/EU (RoHS 2)
Tekniske data
Tilbehør
Downloads

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.