Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273

Cylindrical bushings

Plain bearings - maintenance- and lubrication-free
Sleeve bearings made from high performance plastics provide mechanical stability with the lowest coefficients of friction without additional lubrication. Whether in dirt and dust, in the cleanroom laboratory or under water.
 

Produkter

Filtrer

Ledningskrav
Size
Requirements
Material

Antal produkter: 53

iglidur® G, sleeve bearing, mm
  • Most popular iglidur® material worldwide
  • High wear resistance
  • Resistance to dust and dirt
  • Cost-effective
fra 0,66 USD/Stk.
314 produkter, hvoraf klar til afsendelse:
300 om 24 - 48 timer
Til produktsiden
iglidur® A350, sleeve bearing, mm
  • The endurance runner at higher temperatures in the food sector
  • Compliant with EC regulation 10/2011 EC
  • FDA compliant
  • Available as iglidur® A350, Bar stock and for injection moulding
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180 °C
fra 2,23 USD/Stk.
79 produkter, hvoraf klar til afsendelse:
15 om 24 - 48 timer
Til produktsiden
iglidur® M250, sleeve bearing, mm
  • The tough all-rounder with excellent vibration dampening
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
fra 0,87 USD/Stk.
214 produkter, hvoraf klar til afsendelse:
169 om 24 - 48 timer
Til produktsiden
iglidur® P210, sleeve bearing, mm
  • Specialist for pivoting, rolling applications and more - Good coefficients of friction and wear on almost every shaft
  • Low humidity absorption
  • Extremely wear resistant especially up to 20 MPa in pivoting applications
  • Versatile: performance on many different shafts
  • Good with edge loads
  • Lubrication and maintenance-free
  • Standard range from stock
fra 0,91 USD/Stk.
78 produkter, hvoraf klar til afsendelse:
9 om 24 - 48 timer
Til produktsiden
iglidur® J, sleeve bearing, mm
  • The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
fra 1,14 USD/Stk.
185 produkter, hvoraf klar til afsendelse:
144 om 24 - 48 timer
Til produktsiden
iglidur® P, sleeve bearing, mm
  • The cost-effective outdoor allrounder - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity
fra 0,81 USD/Stk.
124 produkter, hvoraf klar til afsendelse:
52 om 24 - 48 timer
Til produktsiden
iglidur® X, sleeve bearing, mm
  • The chemical and temperature specialist, up to 150 MPa static
  • Temperature resistant from -100 °C to +250 °C in continuous operation
  • Universal chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
fra 2,99 USD/Stk.
134 produkter, hvoraf klar til afsendelse:
113 om 24 - 48 timer
Til produktsiden
iglidur® J260, sleeve bearing, mm
  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglidur® J
fra 1,72 USD/Stk.
11 produkter, hvoraf klar til afsendelse:
11 om 24 - 48 timer
Til produktsiden
iglidur® J350, sleeve bearing, mm
  • Endurance runner with high dimensional stability at high temperatures - Can be used with many kind of shafts and loads
  • Excellent coefficient of friction against steel
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Continuous service temperature up to +180 °C
  • For medium to high loads
fra 1,52 USD/Stk.
80 produkter, hvoraf klar til afsendelse:
12 om 24 - 48 timer
Til produktsiden
iglidur® J3, sleeve bearing, mm
  • The new endurance runner: specialist for pulsating loads
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
fra 1,11 USD/Stk.
83 produkter, hvoraf klar til afsendelse:
21 om 24 - 48 timer
Til produktsiden
iglidur® R, sleeve bearing, mm
  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective
fra 0,81 USD/Stk.
20 produkter, hvoraf klar til afsendelse:
20 om 24 - 48 timer
Til produktsiden
iglidur® L250, sleeve bearing, mm
  • For high speeds
  • Specially made for fast rotating applications
  • Very low coefficients of friction
  • Excellent wear resistance
fra 3,83 USD/Stk.
6 produkter, hvoraf klar til afsendelse:
6 om 24 - 48 timer
Til produktsiden
iglidur® D, sleeve bearing, mm
  • Low-cost material with silicone
  • Low coefficients of friction at high speeds
  • For low loads
  • Cost-effective
På forespørgsel
 
Leveringstid efter forespørgsel
Til produktsiden
iglidur® W300, sleeve bearing, mm
  • The classic endurance runner, very wear resistant on (virtually) all shafts
  • For especially long service life
  • Low coefficient of friction
  • Extremely high wear resistance
fra 1,27 USD/Stk.
168 produkter, hvoraf klar til afsendelse:
164 om 24 - 48 timer
Til produktsiden
iglidur® Z, sleeve bearing, mm
  • Extremely long service life under extreme conditions, resistant to wear and impact even at high loads and temperatures
  • Excellent wear resistance especially with high loads
  • High thermal resistance
  • For extreme loads
fra 3,71 USD/Stk.
118 produkter, hvoraf klar til afsendelse:
62 om 24 - 48 timer
Til produktsiden

Konsultation

We would be happy to answer your questions personally

Photo
Anders Riis Olesen

Teknisk Konsulent BRG

Skriv e-mail

Levering og vejledning

Personlig betjening:

Mandag til fredag fra 7:00 til 20:00.
Lørdag fra 8:00 til 12:00.

Online:

24h