Vælg venligst leveringssted

Valget af land/region kan påvirke diverse faktorer som pris, forsendelsesmuligheder og produkttilgængelighed.
Se alle lokationer
Gå til www.igus.com
Ses vi til dette års RobotBrag d.30.-31. maj i Odense?
Gratis Tilmelding!
myigus
Indkøbskurv
(0)
Min kontaktperson
igus® ApS

Lysholt Alle 8

DK – 7100 Vejle

+45 86603373
+45 86603273
Send meddelelse
Se alle kontakter
DK(DA)
Menu
  1. Hjem
  2. Energikæder
  3. Energy chains Wiki
  4. Assembly Overview
  5. Assembly Instructions System E4/00

E4/00 system assembly instructions

Joining energy chains

System E4/00 Assembly Lay the inner links next to each other and fit the outer links.
System E4/00 Assembly Install the crossbars - press and lever them in with a screwdriver.
System E4/00 assembly Mount the clip - for energy chains with crossbars every second link - press and lever it in.

Disassembling energy chains

System E4/00 assembly Disassembling crossbars - position the screwdriver and pry them open.
System E4/00 assembly Insert the screwdriver into the groove on the side link and release it by levering it out.
System E4/00 assembly Remove the outer links by moving them to the side and separate the chain links.
 

Separating and joining energy tubes

Separating

System E4/00 assembly Remove the lid/bottom.

Separating

System E4/00 assembly Position the screwdriver and pry them open.

Joining

System E4/00 assembly Mount lids/bottoms - attach them at an angle and snap them into place.