iglidur® J200 | Specially for aluminium shafts
iglidur® J200 is the result of the development of extremely low friction plain bearing materials. When using plain bearings in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.
 
Typical application areas
 
Vending machinery
 
You can find further applications here:
Industry solutions
 

When to use it? For applications with anodised aluminium shafts When lowest coefficients of friction are required When it comes to high service life with low loads

When not to use it? For steel shafts iglidur® J, sleeve bearing, mm iglidur® W300, sleeve bearing, mm When temperatures are continuously higher than +90°C iglidur® V400, sleeve bearing, mm When a cost-effective universal bearing is required iglidur® G, sleeve bearing, mm iglidur® P, sleeve bearing, mm

Use our filter options to find the suitable product 
 
Tolerances and measurement system
The installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining