iglidur® Q290 - material data

Table of contents

The most important specifications at a glance

Descriptive technical specifications
Wear resistance at +23°C- 🟧 🟧 🟧 🟧 ⬜️ +More information on wear resistance
Wear resistance at +90°C- 🟧 🟧 🟧 ⬜️ ⬜️ +
Wear resistance at +150°C- 🟧 🟧 ⬜️ ⬜️ ⬜️ +
Slide property- 🟧 🟧 🟧 🟧 ⬜️ +Coefficient of friction, dynamic, against steel, dry: 0.14 - 0.26
Wear resistance under water- 🟧 ⬜️ ⬜️ ⬜️ ⬜️ +
Media resistance- 🟧 🟧 🟧 ⬜️ ⬜️ +More information on media resistance
Resistant to edge pressures- 🟧 🟧 🟧 🟧 🟧 +
Resistant to shock and impact loads- 🟧 🟧 🟧 🟧 🟧 +
Dirt resistance- 🟧 🟧 🟧 🟧 🟧 +

When do I use this material?

  • When a long-lasting plain bearing is required for tough operating conditions (agricultural equipment, construction machinery, etc.) with medium to high dynamic loads on "soft" shafts
  • Ideal for soft shafts
  • Suitable for high edge pressures

When do I use a different material?

Temperatures

min. application temperatureUpper application temperature, long-termUpper application temperature, short-termIn addition secure axially from
-40°C+140°C+180°C+80°C

Permissible surface speeds

Maximum surface speeds [m/s]RotatingOscillatinglinear
Long-term0.80.61.0
Short-term2.01.42.0

Permissible pv values

iglidur Q290-diagram med faldende kurve på logaritmiske X- og Y-akse.

Mechanical properties

Friction and wear

iglidur Q290dryGreasesOilWater
Coefficient of friction μ0.14 - 0.260.090.040.04

Shaft materials

Søjlediagram med værdier fra A til G, hvor B og E er højest, og A og D er lavest.
Sliddiagram: Kurve A stiger kraftigt til 240, mens B er næsten konstant omkring 40.
Diagram over slid ved svingbevægelser med tre søjler.

Chemical resistance

MediumResistance
Alcohols+ up to 0
Greases, oils without additives+
Hydrocarbons+
Fuels+
Strong alkalines+ up to 0
Strong acids-
Diluted alkalines+
Diluted acids0 to -

Moisture absorption

Installation tolerances

Diameter d1 [mm]Housing H7 [mm]iglidur Q290 plain bearing E10 [mm]Shaft h9 [mm]
up to 3+0.000 +0.010+0.014 +0.054-0.025 +0.000
> 3 up to 6+0.000 +0.012+0.020 +0.068-0.030 +0.000
> 6 up to 10+0.000 +0.015+0.025 +0.083-0.036 +0.000
> 10 up to 18+0.000 +0.018+0.032 +0.102-0.043 +0.000
> 18 up to 30+0.000 +0.021+0.040 +0.124-0.052 +0.000
> 30 up to 50+0.000 +0.025+0.050 +0.150 -0.062 +0.000
>50 to 80+0.000 +0.030+0.060 +0.180-0.074 +0.000
>80 to 120+0.000 +0.035+0.072 +0.212-0.087 +0.000
> 120 up to 180+0.000 +0.040+0.085 +0.245-0.100 +0.000

Thermal conductivity

Coefficient of thermal expansion

Compressive strength

Vacuum

Radioactive radiation

Typical application areas

Mejetærsker på en kornmark.

Agricultural engineering

Tipvogn med markerede lejepunkter og iglidur Q2E til tunge maskiner.

Construction vehicles

Lastbil med udfoldet liftbagsmæk og synligt udstyr til patienttransport.

Commercial vehicles

Rådgivning

Jeg vil med glæde besvare deres spørgsmål personligt.

Levering og vejledning